600 x 600 LED Panel Surface Mounting Frame / Box Kit
› Compatible with LEDPanelStore LED Panels
› Easy Installation
› Ideal for plasterboard/concrete ceilings
› White powder coated finish
£18.00 £15.00
SKU
SMK-6060-50
This Surface Mount Ceiling Frame is perfect to mount our LEDPanelStore LED Panel Lights in locations without suspended ceiling grid (e.g. plasterboard ceilings) . Surface mount kits are ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
The kit screws to the ceiling. The panel is then slid in, and the remaining side then screws on to complete the installation.
The frame has sufficient depth to accommodate the LED driver / emergency pack. (these should be placed in the centre of the panel to allow good heat dissipation)
All LED Panel Store panels come with a no quibble 5 Year Warranty and a 14 Day Money Back Guarantee
- A bit fiddly until you figure out what order to install the bits unless you have someone give you a hand.Collected via eKomi
- Haven't fitted it yet, but it's arrived in tact.Collected via eKomi
- Makes installation easy and the finished article looks goodCollected via eKomi
- Straightforward to assemble and produces a very tidy result that looks as good as much more expensive light fittingsCollected via eKomi
- Oh this is a very bright light, perfect if you have a room such as a kitchen that needs something like a daylight panel. simple easy to fit comes with a driver. Measure the ceiling before ordering so you can see how big it looks before purchasing.Collected via eKomi
- Purchased for self fit - I am not in the trade. Products are well packed and service is good.Collected via eKomi
- Easy assemblyCollected via eKomi
- No problems did the job they were supposed to.Collected via eKomi
- Well made and easily fitted.Collected via eKomi
- Excellent for home officeCollected via eKomi
- Excellent fitting frames for panel lightsCollected via eKomi
- Really easy to assemble and connect up. Competively priced and appears to be good quality.Collected via eKomi
- Looks amazing, everyone who has seen it, wants to know where I got it from, now you know!Collected via eKomi
- Used a few of these now and they just work really well.Collected via eKomi
- Quality - fits together with no gaps. Allows control box to be mounted within gap above LED panel - all good!Collected via eKomi
- Very easy to fit and improves the clean look.Collected via eKomi
- Difficult to assemble and fit in my opinionCollected via eKomi
- Easy to fit and solid frame workCollected via eKomi
- Panels are great and can be replaced with easeCollected via eKomi
- Excellent product 600 x 600 and above easier to fit with two persons.Collected via eKomi
- just the job for surface fixingCollected via eKomi
- Easy to put together and allows space for the dimmable electricsCollected via eKomi
- As with the light panel. Would recommend this productCollected via eKomi
- Come with all screws etc for easy fixingCollected via eKomi
- Good, though I did need to prize the screw slots open slightlyCollected via eKomi
- Good quality frame and easy to fit. Screws provided for the frame are silver. Used white self adhesive labels dots to cover. Would have been better if these or white caps had been suppliedCollected via eKomi
- I would highly recommend this product to all commercial electrical installersCollected via eKomi
- These were required to mount the panelsCollected via eKomi
- Brilliant accessory for surface mountingCollected via eKomi
- Looks good, easy to put together.Collected via eKomi
- Easy to fitCollected via eKomi
- Excellent visible quality. Straightforward to assemble and fit - comprehensive and easy to understand instructions supplied. Rapid delivery, well packaged, and an excellent price. Good communication also. Highly recommended.Collected via eKomi
- Great productCollected via eKomi
- Dose the jobCollected via eKomi
- Used to surface mount 2 X 600 X 600 LED panels in my kitchen. Light, Easy to mount and well made. To only comment would be for the manufacturer to include white screw head covers to match the powder coating, but it is a very minor gripe.Collected via eKomi
- Used for mounting the LED panel to the standard ceilingCollected via eKomi
- Mounting kit easy to assemble and slot the light panels intoCollected via eKomi
- I would recommend this product to anyone wanting a modern, trouble free and very versatile way of lighting their home - we use them in our kitchen, bathrooms and loungeCollected via eKomi
- Recommend the light thought the surface mounting kit rather expensive for what it is but could not do job without itCollected via eKomi
- The surface mounted kits are perfect for the 600 x 600 panels and are very competitively priced. There is plenty of room for the driver and cable. ***Collected via eKomi
- Does what it says.Collected via eKomi
- easy to assemble, does the jobCollected via eKomi
- Superb service, will use againCollected via eKomi
- Only one panel this time, but the guys gave me the same care and attention as if I was placing a major order.Collected via eKomi
- wall mountCollected via eKomi
- Really easy to assemble and install.Collected via eKomi
- For use in the kitchen Yes, I would recommend this company to othersCollected via eKomi
- Screws should be longer self tapping screwsCollected via eKomi
- GoodCollected via eKomi
- I used the LED Panels in an office environment and everyone likes the bright even light the panels, together with the savings in electricity they give.Collected via eKomi
- It was only a mounting this timeCollected via eKomi
- This order is used in lighting for a training school, it is easy to fit and looks good.Collected via eKomi
- Would survive the addition of double sided tape to the surface going up to the ceiling.This would aid positioning and marking the location of the mounting screws. White screw caps for the corner screws would enhance the finished product.Collected via eKomi
- Simple construction and fit. Looks inconspicuous on a white ceiling. Quite easy to strip the threads on the self tappers when putting it together so a little care is needed. Overall does the job well.Collected via eKomi
- Ceiling mount for LED Panel in centre of service area. One also used as frame/box to mount in display area. Created an effective mount for display. Excellent quality and ease of fitting.Collected via eKomi
- Easy to install and looks goodCollected via eKomi
- Easy to install and looks goodCollected via eKomi
- very goodCollected via eKomi
- Upgrading lighting in my wife`s office collected Brownie PointsCollected via eKomi
- Dont have false ceiling? No problem, with this mounting kit its the matter or 4 screws and you done.Collected via eKomi
- excellent quality and easy to installCollected via eKomi
- Easy to installCollected via eKomi
- 10/10Collected via eKomi
- Well made simple designCollected via eKomi
- Very easy to installCollected via eKomi
- With that kit we installed the lights in our store roomCollected via eKomi
- Great if you have a non-standard suspended ceiling or want to mount the panel to any kind of surface or wall that you want to.Collected via eKomi
- I have used this to mount panel on ceiling of kitchen. Love the look it has achievedCollected via eKomi
- 5🌟🌟🌟🌟🌟 from start to finish will definatley be using againCollected via eKomi
- These finish off the lights very well and look neat.Collected via eKomi
- Superb workshop lighting.Collected via eKomi
- Easy to use and looks good.Collected via eKomi
- Really easy to fit!Collected via eKomi
- All friends & colleaguesCollected via eKomi
- We used these with the led panel because we didn't have a drop ceiling, brill product , worked out perfectly and they look great !Collected via eKomi
- A bit fiddly to put together, but once you've done one it becomes a lot easier. If like me you buy white mounting kits it might be a good idea to touch up the screw heads with white paint just to finish them off.Collected via eKomi
- Flimsy and hard to put together screws of poor quality and snap heads off if not careful as I did with one, pre tapped holes in frame would be a better idea rather than the screws carving a thread into the hole sockets in the frame !!Collected via eKomi
- Use the products on site installationsCollected via eKomi
- Great Product and serviceCollected via eKomi
- Nicely made with full metal construction and good finish. Driver fits comfortably behind panel Have bought another 20Collected via eKomi
- We have used the lighting in a Mobile Dog Grooming van, it was ideal as it was so slimline and brighter than individual down lights. The product was of good quality and easy to installCollected via eKomi
- all goodCollected via eKomi
Related Products
£7.50 £6.25
£27.00 £22.50
£27.00 £22.50
£27.00 £22.50
£5.10 £4.25
£18.00 £15.00
£12.00 £10.00
